Representative PVE photo, not taken on this project.

At a glance

Project facts

Project
Widen Seminole Expressway (SR 417), SR 434 to north of CR 427
Owner
Florida’s Turnpike Enterprise (FDOT)
Location
SR 417, Seminole County, FL (Sanford / Winter Springs area)
Financial Project ID
437952-1-32-01
PVE service
Geotechnical drilling and roadway soil survey
PVE’s role
Geotechnical subconsultant to BCC Engineering, the design consultant
Exploration
Hand auger, machine auger and SPT borings along the corridor, plus laboratory testing
When PVE worked
2025
The project

Widening SR 417 from four to eight lanes

Florida’s Turnpike Enterprise proposed widening the northbound and southbound lanes of SR 417 from four to eight lanes. The work includes widening the bridges over Lake Jesup, Sanford Avenue, the CSX railroad, North Ronald Reagan Boulevard and East Lake Mary Boulevard, plus new stormwater treatment, signs, lighting and retaining walls.

Roadway soil surveyHand auger, machine auger and SPT borings along the SR 417 corridor.
PVE’s role

Roadway soil survey for the widening

Working for BCC Engineering under Florida’s Turnpike Enterprise, PVE performed the geotechnical field work and laboratory testing for the roadway and developed the geotechnical recommendations for roadway design.

Field exploration

Manual hand auger, machine auger and SPT borings along the corridor. Boring locations were set in the field and the as-drilled locations surveyed with survey-grade GPS.

Laboratory testing

Soil classification, grain size analysis, natural moisture content, organic content and Atterberg limits. Bulk samples were collected for Limerock Bearing Ratio testing by FDOT’s State Materials Testing Lab.

Recommendations

Engineering evaluation of near-surface soils for roadway design, including handling and use of each soil layer under FDOT Standard Plans 120-001 and 120-002, and general construction considerations.

How we work

How PVE delivers geotechnical drilling

These are company-wide capabilities. PVE runs its own drilling fleet and an FDOT-qualified, CMEC-accredited laboratory.

Three in-house drill rigs: truck-mounted, track-mounted and mudbug

Barge capability for borings over lakes, rivers and coastal waters

FDOT prequalified in Work Groups 9.1, 9.2 and 9.4.1

CMEC-accredited laboratory using ASTM, AASHTO and FDOT methods

Contact

Have a similar project?

Send us a site plan with proposed structures and any boring layout, and we will scope the exploration program.

Address

4071 L B McLeod Rd Suite E Orlando, FL 32811

Hours

Mon–Fri 8 AM–5 PM

Request a drilling proposal